لي-MA01

         

         LY-HD45-01

                     Main body: SUS304 (Stainless Steel)

                        Additional components: POM, PA66, Brass

                        TYPE：Fixing set for toilet seat cover

                        FEATURE：Quick release, easy installation

                        Nail Tightness test   13000times    

                        Neutral Salt Spray Test  96 hours      

                        Acetic Acid Salt Spray 48 hours

                        Screws Tightening  3.0-5.0Nm

                        Hardness of rubber  Shore A 70±5                         

                        Load Testing 600N

                 1. Smooth Base Surface: The base surface should be flat and even, without any bumps or irregularities.

                      2. The product's surface should be free of any burrs, sharp edges, or other defects.

                      3. Stainless steel rivets must pass a 10kg tensile force test; no detachment is allowed.

                      4.Ensure that the components and materials match as specified in the 3D drawings. 

                      5. All products must pass quality control checks, including visual inspection and functional testing, before shipment.

                      6.Packing should be free of holes, broken edges, and cracks.

                   1.Insert the bolts into the seat hinges.

                     2.Align the seat with the mounting holes on the toilet bowl.

                     3.Insert the bolts through the holes from above.

                     4.Secure the seat by placing washers and nuts onto the bolts and tightening them with a screwdriver and wrench.

                     5.Ensure the seat is properly aligned before fully tightening the nuts.

                     6.Snap on any provided bolt covers for a clean, finished look.